Payloads and SD cards
      Back to home
      1. Help Center
      2. Maintenance and Replacements
      3. Payloads and SD cards

      Move the RX1RII camera into a new mount

      Step-by-step instructions on how to remove the RX1RII camera and mount from the drone, remove the camera from the old mount, place it into the new one and back into the drone.

      Step-by-step instructions

      Step 1 Remove the RX1RII camera attached to the mount from WingtraOne

      Step 2 Remove the RX1RII from the mount

      Step 3 Place the RX1RII into the new mount

      Step 4 Place the RX1RII attached to the new mount into WingtraOne

      • Use the Torx screwdriver to tighten the four screws in the four corners of the payload area.
      • Plug the USB-C universal payload connector into the drone.
      • (Optional) close the PPK cover by pressing the PUSH button.
      • Close the top cover.
      • Do a test flight. Before the flight, double-check that all the cables are connected firmly. If any issues with the camera appear, please check this Knowledge Base article.