Quickstart guide (EN)
      Back to home
      1. Help Center
      2. 1. Getting Started with WingtraOne
      3. Quickstart guide (EN)

      7. Geotag your data

      To geotag your collected data

         

      1. Install WingtraHub on your computer; find instructions at knowledge.wingtra.com
      2. Take the SD card out of the camera inside the drone and copy the WingtraPilotProjects folder to your computer
      3. Open WingtraHub
      4. Open the WingtraPilotProjects folder
      5. Select the projects you want to process and press "Next"
      6. (Optional) tick the "CSV output only" box to speed up the geotagging process if geotags are not required in the EXIF metadata of the images
      7. (Optional) tick the "PPK processing" box if you are processing PPK data; see further for detailed instructions
      8. Press "Start processing"

      Non-PPK geotagging can also be performed on the WingtraPilot app. Consult knowledge.wingtra.com for a step-by-step guide.

      RedEdge-MX data is geotagged after each flight automatically.

      Optional for PPK data geotagging:

      Add "Base file(s)" from your computer—select all available RINEX files.

      Then add "Base location" as follows:

      1. Press "Add new"
      2. Enter the coordinates of the base and give a descriptive name
      3. Press "Save"
      4. Press "Select"

       

      >>> Next step: 8. Analyze your data

      <<< Previous step: 6. During the flight