The camera mount screw rotates endlessly

This article will show you how you can unscrew the camera mount screw in case it rotates endlessly

When one or more camera mount screws rotates endlessly and you can't loosen the screw, it means that the rivet inside the drone broke off the support plate. The main cause of this issue is overtightening the screws when installing the payload into the drone. If you have a torq screwdriver please make sure that you do not use more than 0.3 Nm of torque when tightening the screws.

Once the screw starts to rotate endlessly try to apply some pressure with 2 fingers on the lower part of the plane where the screw is fixed. Unscrew the screw while maintaining the pressure on that part of the drone. If you do not succeed at first try to variate the pressure with your fingers and the rotation speed of the screwdriver.