Payloads and SD cards
      Back to home
      1. Help Center
      2. Maintenance and Replacements
      3. Payloads and SD cards

      Move the RedEdge-MX to a WingtraOne GEN II mount

      This article offers the step-by-step instructions on how to remove a RedEdge-MX camera from a WingtraOne GEN I RedEdge mount and insert it in a WingtraOne GEN II compatible mount.

      Step-by-step instructions

      Step 1. Remove the RedEdge-MX camera attached to the mount from WingtraOne GEN I

      Step 2. Remove the RedEdge-MX from the mount

      Step 3. Place the RedEdge-MX camera into the GEN II mount

      Step 4. Place the RedEdge-MX attached to the new mount into WingtraOne GEN II

      • Use the Torx screwdriver to tighten the screws into the four corners of the payload area
      • Plug the USB-C universal payload connector into the drone
      • Close the top cover
      • Run a test flight