Basic Replacements
      Back to home
      1. Help Center
      2. Maintenance and Replacements
      3. Basic Replacements

      Install the RC receiver kit

      Step-by-step instructions on how to install the RC receiver on WingtraOne GEN II drones.

      The RC receiver is integrated on the PPK cover on the WingtraOne GEN II drones that the PPK cover looks like in the picture below:

      old design PPK

      For WingtraOne GEN II drones with a different PPK cover design, the RC receiver should be installed on the PPK cover in case the RC functionality is needed.

      The RC receiver kit contains the following items:

      • Remote Control (RC)
      • Torx T6 screwdriver
      • RC receiver with cover and screws

      items

      After the RC received is installed, follow the instructions of the article How to rebind the remote control to bind the RC receiver to the transmitter.