Payloads and SD cards
      Back to home
      1. Help Center
      2. Maintenance and Replacements
      3. Payloads and SD cards

      Insert the Altum camera in WingtraOne

      Learn how to place the Altum camera into the WingtraOne.

      This process should be carried out by all customers themselves. Wingtra's warranty is not affected by this replacement.

      Step by step instructions

      Step 1 Open the top cover

      Step 2 (Optional) Remove the PPK module or RGB camera

      Step 3 Insert the Altum camera into the mount

      Step 4 Insert the Altum camera with the mount into WingtraOne

      Step 5 Close the top cover

      • Close the top cover.

      Step 6 Finalize the new camera setup

      • Power on the WingtraOne.
      • Open the WingtraPilot app and connect the telemetry antenna to connect to WingtraOne.
      • Create a new flight plan and make sure to select the right camera when going 
        through the wizard.
      • The new Altum camera will be detected and WingtraPilot will prompt you to repower WingtraOne to initialize it correctly.
      • Confirm by clicking "Yes" and repower the WingtraOne.