Payloads and SD cards
      Back to home
      1. Help Center
      2. Maintenance and Replacements
      3. Payloads and SD cards

      Changing from RedEdge to RGB camera

      Learn how to change from the RedEdge to an RGB camera on your WingtraOne.

       

      This replacement is recommended to be carried out by all customers themselves. Wingtra's warranty is not affected by this replacement.

      Step by step instructions

      Step 1 Open the top cover

      Step 2 Remove the RedEdge camera

      Step 3 Insert the RGB camera

      Step 4 Close the top cover

      • If applicable: Mount the PPK module and close the PPK cover using the PUSH button.
      • Close the top cover.

      Step 5 Finalize the RGB camera setup

      • Power on the WingtraOne.
      • Open the WingtraPilot app and connect the telemetry antenna to connect to WingtraOne.
      • Create a new flight plan and make sure to select the right camera when going 
        through the wizard.
      • The new RGB camera will be detected and WingtraPilot will prompt you to repower WingtraOne to initialize it correctly.
      • Confirm by clicking "Yes" and repower the WingtraOne to finalize the camera setup.